NEKPOKKA 12V DC air conditioner/ultra-thin car roof air conditioner is applicable to minivans, off-road vehicles, pickups, motor homes, trucks, agricultural vehicles, excavators, etc (12V voltage)

Price: $1,150.00
(as of May 17, 2024 09:13:19 UTC – Details)

Product Description

Indoor panels

Long strip air outlet, side mounted brushless motor, can automatically swing forward and backward, with large angle and multi-directional air supply. High definition digital panel display, multiple modes and adjustable gears, with added air ducts between the bottom of the air conditioner and the decorative panel, making installation more convenient.

Appearance and bottom

The air conditioner casing is made of ultra-high hardness ABS material, which is not easy to deform and is atmospheric and beautiful. Connect the bottom wiring harness of the air conditioner to the wiring harness of the indoor decorative panel. There are two adjustable support feet at the bottom, which can be adjusted to achieve a parallel state after installing the air conditioner.

Ultra thin streamlined design

The thickness of the air conditioner is 14.5cm, and the overall streamlined design greatly reduces wind resistance during driving. Smooth lines make it look more integrated with cars.

12V DC Roof Air Conditioner Parameters

Compressor: Vortex electric compressorVoltage: 12VStarting current: 75APower: 600 wattsRefrigeration capacity: 6500BTU/1800WRefrigerant type: R134a/400gCompressor speed: 2650 rpmWeight: 30kg

matters needing attention

The starting current of 12V air conditioner shall reach 75A. Before purchasing, please confirm whether the battery meets the requirements.Before adding refrigerant, vacuum treatment (15-20 minutes) is required, and then add refrigerant.There is no refrigerant inside the air conditioner, so R134a/400g should be added.

Installation steps

Skylight size: approximately 20 * 40cm. Actual measurement is required before opening the hole.

Clean the sunroof: Clean the area around the sunroof and then stick the sealing strip. Then use glass glue to apply a circle on the inside and outside of the sealing strip to prevent water leakage on rainy days.Install the host: put the air conditioner host into the sunroof, and then adjust the two support feet at the bottom of the air conditioner to make the air conditioner flat. Leave the power cord outside the car.Fixed air conditioner: Next, enter the car. There are two screw holes next to the bottom air outlet of the air conditioner. Screw the long screws of the accessory package into the holes. Then the accompanying accessories include a black fixing rod, which is inserted into a long screw at both ends and then clamped onto the roof to secure the air conditioner. (Note: The opening of the car roof should not be too large, otherwise the black fixing rod is too short to fix the air conditioner. Before installation, confirm the required size of the air conditioner bottom. There are four screw holes at the bottom of the air conditioner, which are the standard.)Plug in wiring harness: Connect the wiring harness that extends from the bottom of the air conditioner to the panel. Decorative panels and panels need to be combined before inserting connectors, otherwise it will affect the next step of operation.Installation panel: The air conditioning panel and decorative panel are combined together, and then the air conditioning panel is inserted into the air outlet channel at the bottom of the air conditioner.Fixed panel: Use black screws to secure the four corners of the panel.Add refrigerant: Vacuum treat for 15-20 minutes, then turn on the air conditioning and add R134a refrigerant 400g.Power cord: Do not connect the positive and negative poles of the power cord incorrectly. The red color of the power cord represents the positive pole/the black color represents the negative pole. A 12V battery requires an output current of around 75A. You can use a multimeter to test whether the current output of the battery is sufficient.

This new type of roof electric air conditioner shell is made of ABS material, and the whole machine is of streamlined design, with smooth overall lines. The side rhombus air outlet increases the air intake.
Internal structure: the condenser is enlarged and widened, with length of 55 * width of 15 cm. Thickened copper tube evaporator, 75 * 33cm long. Vortex integrated electric compressor, when the weather is hot outside, the air conditioning refrigeration is better. Low power consumption.
Compressor parameters: voltage: 12V. Refrigerating capacity: 6500BTU/1800W. Refrigerant type: R134a/400g. Compressor speed: 2650 rpm.Cooling space: 300 Cubic feet
The bottom panel is equipped with a strip integrated air outlet, and an air inlet motor is installed at the side, which can swing back and forth automatically, and supply air in large angle and multi-direction. In the super-strong mode, the temperature of the air outlet can reach 16 ° C. HD digital panel display, multi-mode and multi-gear adjustable, can meet a variety of application scenarios. An air duct is added between the base plate and the trim panel, which makes the installation easier
The whole machine is 75.5cm long, 67cm wide and 14.5cm high. Suitable for small sunroof models.