Blue Jeans Cable Canare 4S11 Speaker Cable, with Ultrasonically-welded Conventional (Non-Bi-Wire) Terminations, (One Cable – for one Speaker); Assembled in The USA (15 foot, Bananas to Bananas, Black)

Price: $71.50
(as of May 08, 2024 19:07:54 UTC – Details)

Product Description

BJC Speaker Cable, made with 4S11 and Welded Locking Banana Plugs, conventional (non-bi-wire) terminations, Black

At Blue Jeans Cable, we were never happy with the conventional methods of attaching speaker cable to banana plugs. Setscrews are fine, but lack pull strength; compression connections are never as strong as they look like they’re going to be; and solder, on large high-mass connectors, is slow going and tends to cause a lot of insulation meltback. Our solution: ultrasonic welding. Our Sonobond Ultrasonic Welder (made in West Chester, PA) welds the copper wire to the brass banana plug body without the excessive heat associated with conventional welding, fusing copper to brass in a tight, strong, low-resistance, reliable connection.

Conventional (non-bi-wired) Terminations:

This cable is made with two banana plugs on each end, for conventional speaker wiring. If you’re looking for a cable with two on one end and four on the other for bi-wiring, we offer those as well — search our listings.

Ultrasonic-Welded Locking Bananas: a Blue Jeans Cable exclusive feature

The Plug

This is our locking banana plug, disassembled. Notice anything? There’s no attachment mechanism for the wire — no set screws, no clamps, nothing but a channel for the wire to sit in.

The Welder

This is one of our Sonobond Ultrasonic Welders, in our Seattle shop. Unlike heat-based methods of welding, it drives a large amount of ultrasonic vibration into the junction between the wire and the plug, fusing them together.

The Weld

Here’s a plug body after welding. The surface structure of the wire breaks down during welding, allowing dissimilar metals to fuse. The resulting weld has extremely low contact resistance and high pull strength.

The “Locking” Feature

The outer collar of the banana plug is threaded. It should inserted into the binding post with the collar “backed off” from the plug end (top image). When the plug is in the binding post, simply turn the locking collar clockwise (bottom image) and it pushes a central pin forward, expanding the splines for a firm engagement in the post.

Is Discontinued By Manufacturer ‏ : ‎ No
Package Dimensions ‏ : ‎ 10.91 x 10.31 x 2.13 inches; 1.9 Pounds
Item model number ‏ : ‎ BJC4S11MBB15
Date First Available ‏ : ‎ December 5, 2016
Manufacturer ‏ : ‎ Blue Jeans Cable
ASIN ‏ : ‎ B088SYTBPL

NOTE: This is a single cable, for wiring one speaker. If you are connecting a pair of speakers, you will need two.
We build these in our Seattle cable shop, using an ultrasonic welding process which is unique in the speaker cable industry.
Ultrasonic welding gives our terminations exceptional pull strength and low contact resistance
Our locking banana plugs insert easily into binding posts, and then a twist of the outer shell tightens them for a secure fit.